Prototrak Plus mill has no rs-232 flow control.īut Prototrak AGE mill I think might have it so maybe can do DNC.
#V24 CNC SOFTWARE SOFTWARE#
So on some machines that use no flow control DNC would not work, but newer machines that use software flow control (handshaking) might be able to DNC. I send file to CNC and send it back to computer to see if 'translation' by CNC is ok(edit if needed). Mastercam software has built in text editor. It might DNC if I set Xon and Xoff software flow control. I have other software that came with mastercam for rs-232 sending files.
Hyperterminal works although sometimes it malfunctions (not sure why) and computer needs restart. Microsoft Terminal I would have to find old Win3.1 computer. Same as 2 computers sending a file from one to another. Thank you for DNC info Xon and Xoff so when machine is ready for more CNC sends ok to send more every so many bits or bytes and computer sends it til given signal to stop. When the machines needed 'code' the Solitare card being flipped would hang in the air until the machine was fed. I used to run both machines and play Solitare at the same time on an old 286 computer. In 2.5D machining there is time between commands as you mill the side of a part (for instance) which gives plenty of time for Terminal to feed the other machine. You could watch it stair step up alternating between machines. When I was using two iterations of it, one for each machine I was worried what might happen if both machines needed 'code' at the same time. You will want do do some simple tricks to make it comfortable to use but it does a smooth job.
#V24 CNC SOFTWARE HOW TO#
Waaaay back, I have a copy and how to set it up if your interested. I confess I didn't figure it out in Hyper. Actually it's the old 'TERMINAL' program, Before Hyper terminal. You can run it with both of operating systems like and 32-bit also. Therefore, it is very simple to use with a complete, user-friendly interface. OkayFreedom VPN 2017 License is very easy to use by the newbie as well as professional users.
I had to set the machine then go to the computer and start feeding the program. What parameters or how do you get it to drip feed? Do you just slow baud rate? Or use software or hardware handshaking?įorgive me for asking, i have never tried DNCI used three wires and Xon Xoff communication.
#V24 CNC SOFTWARE SERIAL#
Each CNC can have up to 24 subfolders to easily separate files by customer, file.ĭrip feed with microsoft terminal? You mean hyperterminal? I use it to transfer cnc files by rs-232 serial port. Dnc software communication program for cnc machines RS232 serial comms.
0 kommentar(er)
